Performance Structural Timber Screws
Performance Structural Hex Socket Screws - Used by the trade and DIY enthusiasts. Ideal for sleepers and pergolas
Hex Drive Structural Timber Screws. No pre-drilling in most timbers. Natural brown ACQ resistant coating. Type 17 point to reduce drive torque, 6.7mm diameter with specially designed serrated milling thread.
Each box comes complete with 65mm driver hex head socket (5/16") driver for easy application.
Select options
This product has multiple variants. The options may be chosen on the product page
Planed All Round Timber Posts
Our Planed All Round (PAR) Timber posts are tanalised for external use. These GREEN softwood timber posts are smooth in appearance and can be used for fence supports or pergolas. Ideally suited for our shiplap panels and gates.
Our PAR posts have a 4 way point which can compliment any fence. They can also be fitted with the point in the ground giving you a flat top.
Please note timber is susceptible to twisting, warping and splitting. The bigger the timber the more likely it is to be effected
Select options
This product has multiple variants. The options may be chosen on the product page
Postmix
Heidelberg/Hanson's postmix concrete is ideal for setting all types of posts. Simply pour down the hole and add water, it sets in 10 minutes. Used by the trade and DIYers. A relatively clean and easy solution compared to mixing ballast and cement.
The quantity required of course does depend on how big the hole is dug and its application. The bigger the hole then more postmix will be required. When fitting spurs to existing posts generally you would only dig down one side of the post and may only need 1 bag per spur. For all other types of post we would recommend 1.5 to 2 bags per full depth hole (550mm). The bags weigh approximately 20-22kg each.
Repair Spurs with Fixings for Timber Posts
Repair Spurs for Timber Posts including necessary fixings
We offer a range of spurs that can either be used at the initial installation for longevity or be added for repairs if timber posts snaps at ground level. The idea of any spur is that they are fixed to the timber post above ground where it has rotted so that you get a good fixing and its dug into the ground and cemented/postfixed into place acting as a new anchor. All our spurs have pre-drilled holes for you to use.
BOLTS/SCREWS ARE INCLUDED. We know how annoying it is having to find suitable fixings. So we make it easier by supplying the necessary M10 coach screws for the Concrete Spurs or SITEMATE pozi high performance screws for the Fencemate Steel Spurs.
These can be easily secured into position using either ballast/cement or postmix also available on this website.
For fencing taller than 2m high we would recommend the larger 100x100 Concrete Spurs for extra strength due to the weight and wind resistance of taller fencing.
75x75 Concrete Spurs or Fencemate steel spurs are perfectly adequate for standard 6ft or shorter fencing. The metal spurs are the thinnest profile so would suit tighter spaces.
Select options
This product has multiple variants. The options may be chosen on the product page
Sawn 8×4 Timber Sleepers
Our sawn timber sleepers are pressure treated for external use. These softwood timber sleepers are the perfect addition to any
Select options
This product has multiple variants. The options may be chosen on the product page
Sawn Double Sided Venetian style Trellis (Hit & Miss)
Our Sawn Double Sided Venetian Panels can be used as stand alone panels or on top of traditional panels. Made with heavy duty sawn timber battens in a horizontal pattern. The battens have approximately 1/4 to 1/2 inch gaps. These more decorative trellis compliment any garden. They can offer more privacy than the Single sided Venetian panels due to being staggered on both sides in a 'hit and miss' fashion.
Constructed from pressure-treated brown sawn timber. All panels are 6ft in width. Odd sizes available upon request
PLEASE NOTE these panels 4ft and bigger are very heavy and require two persons to lift.
Select options
This product has multiple variants. The options may be chosen on the product page
Sawn Single Sided Venetian style Trellis
Our Sawn Single Sided Venetian Panels can be used as stand alone panels or on top of traditional panels. Made with heavy duty sawn timber battens in a horizontal pattern. The battens have approximately 1/4 to 1/2 inch gaps. These more decorative trellis compliment any garden. They can offer more privacy than the traditional 4inch / 100mm sized square holes designs that we also offer.
Constructed from pressure-treated brown sawn timber. All panels are 6ft in width. Odd sizes available upon request
PLEASE NOTE these panels are one sided and have a frame on the back that can be seen from behind. Please see the gallery for product images.
Select options
This product has multiple variants. The options may be chosen on the product page
Sawn Timber Posts
Our sawn timber posts are pressure treated for external use. These softwood timber posts can be used for fence supports
Select options
This product has multiple variants. The options may be chosen on the product page
Shiplap Gates
Our Heavy Duty Vertical Shiplap Gates Built to last, they are framed, edged, and braced for extra durability. Perfect for enhancing your side gate or driveway. Using ex19mm thick shiplap boards, 75mm x 47mm side frame struts and 100mm x 47mm cross members and diagonal timbers. The framework is C24 construction rated for extra quality and durability.
Bespoke Sizes Can Be Made to Order: Available as a pair or single gates. Our gates are custom-made in our workshop, or we can create them on-site if you book our installation service. Whether you need a unique size or a standard option, we've got you covered. Call the office on 0208 599 4289 or email us at [email protected]
Please note this item is the gate only. Ironmongery, door stops, posts and trellis are available separately
Select options
This product has multiple variants. The options may be chosen on the product page