18″ / 450mm Gate drop bolt
2X2 Hole Trellis (Heavy Duty)
Our Heavy duty Trellis can be used as stand alone panels or on top of traditional panels. Made with heavy duty battens in a square hole design these trellis compliment any garden. Made with approx 2inch x 2inch or 50mm x 50mm sized holes. These trellis offer more privacy/security than the traditional 4inch / 100mm sized holes that we also offer. With the additional battens they are also stronger.
Constructed from pressure-treated brown sawn timber. All panels are 6ft in width. Odd sizes available upon request
Select options
This product has multiple variants. The options may be chosen on the product page
Arris Brackets
Arris rail fencing brackets for fixing to timber posts or into concrete mortice posts for arris rail fencing.
There are two main types, arris brackets that fix to timber posts or mortice type that fit into usually existing concrete posts with mortice holes. Perfect for effectively repairing arris type fencing or for new structures. Our brackets are supplied with pre-drilled fixing holes, allowing you to align your arris rail fencing before fixing into place. It's made from galvanised steel, which is very strong and has good resistance to corrosion, so ideal for external applications. These can be fixed into place using nails or screws (available separately).
Select options
This product has multiple variants. The options may be chosen on the product page
Ballast 20mm bags
Hanson/Heidelberg 20mm Ballast Trade bags
All in one sand and gravel for producing concrete. Cement sold separately. For post installation the advised ratio of ballast to cement (sold separately) is 4 ballast to 1 cement.
Bags are approximately 20-22Kg.
What is the difference between ballast/cement and postfix? Postfix is already mixed for convenience and only the addition of water is required. However Postfix is more expensive than mixing your own ballast/cement. For larger projects ballast/cement will work out much cheaper but it is more labour intensive and will result in more mess!
Ready mix postfix also available separately
Base Plate / Bolt down supports
Base Plates / Bolt down Post supports - Used by the trade and DIY enthusiasts.
Used to fix timber posts or Steel Duraposts onto hard standing that can take fixing to such as concrete walls, patios or decks. Saving the need for any unwanted digging.
FINISH: Our timber post bolt downs are finished in epoxy brown. Our DuraPost bolt downs are finished in galvanised silver
PLEASE NOTE these bolt downs don't come with fixings to fit to the ground/patio. These bolt downs are suitable for fencing/screens upto 6ft/1.82m High
Sizes/types available to fit:
3" x 3" / 75mm x 75mm timber posts
4" x 4" / 100mm x 100mm timber posts
48mm Durapost Classic posts
Select options
This product has multiple variants. The options may be chosen on the product page
Birkdale Sitemate Insulated Chisel End Crowbar 60″
From the Birkdale Sitemate range.
If you’re installing a fence on hard or tough ground, a chisel ended crowbar will help you get the job done. Being 60" long the operative can use without needing to get down on their knees. They’re also great for working in tight spaces, where using a fencers graft may be difficult. Also a handy tool for levering heavy items.
Used by our own installers we highly recommend these tools
Birkdale Sitemate Insulated Fencing Grafter 54″
From the Birkdale Sitemate range.
Designed to make digging holes for fence posts easy. Being 54" long this enables the user to dig the hole whilst standing. Great when used in combination with post hole diggers (also available to purchase). Insulated fencers grafts not only help loosen the ground before digging, but offer protection against electrical currents too. Insulated fencers grafts benefit from a long, heavy duty handle for improved performance and comfort.
Used by our own installers we highly recommend these tools
Birkdale Sitemate Insulated Post Hole Digger 54″
From the Birkdale Sitemate range.
Used alongside a fencers graft (sold separately) to create holes by removing dirt from the loosened ground. Insulated shovel holers enable you to quickly and safely create holes for your fence posts. Being 54" long the operative can effectively remove soil from holes without needing to get onto their knees and scoop out with their hands.
Please note these will not work in ground full of concrete, they are effective at removing loose soil.
Used by our own installers we highly recommend these tools
Bow Top Feather Edge Fence Panels (Closeboard)
A cost effective but long lasting solution with a decorative bowed top
Closeboard panels are built to last featuring 19 x vertical feather boards ex 22mm in our standard 6ft wide panels and sturdy backing rails ex 50x35mm. Constructed from pressure-treated BROWN timber.
PLEASE NOTE our bow top panels are not stock items and are made to order. Therefore are treated as bespoke orders. Please refer to the terms and conditions for full details on bespoke orders.
Select options
This product has multiple variants. The options may be chosen on the product page
Bow Top Square Hole Trellis Fence Panel
Can be used as stand alone panels or on top of traditional panels. Made with heavy duty battens in a square hole design these trellis fence panels compliment any garden. Made with approx 4inch x 4inch or 100mm x 100mm sized holes and finished with a Bow Top for decorative finish
Constructed from pressure-treated brown sawn timber. All panels are 6ft in width. Odd sizes available upon request, please contact the office for more details.
Please note in order to get the toprail to bend we use thinner capping than on our standard square top trellis/panels.
Select options
This product has multiple variants. The options may be chosen on the product page
Brown Feather Edge / Closeboard Gates
Our Heavy Duty Feather Edge Gates Built to last, they are framed, edged, and braced for extra durability. Perfect for enhancing your side gate or driveway. Using ex22mm thick feather edge boards and 75mm x 47mm side frame struts and 100mm x 47mm cross members and diagonal timbers. The framework is C16 construction rated for extra quality and durability.
Available in either Brown seen here or Green is also available.
Bespoke Sizes Can Be Made to Order: Available as a pair or single gates. Our gates are custom-made in our workshop, or we can create them on-site if you book our installation service. Whether you need a unique size or a standard option, we've got you covered. Call the office on 0208 599 4289 or email us at [email protected]
Please note this item is the gate only. Ironmongery, door stops, posts and trellis are available separately
Select options
This product has multiple variants. The options may be chosen on the product page