Bow Top Feather Edge Fence Panels (Closeboard)
A cost effective but long lasting solution with a decorative bowed top
Closeboard panels are built to last featuring 19 x vertical feather boards ex 22mm in our standard 6ft wide panels and sturdy backing rails ex 50x35mm. Constructed from pressure-treated BROWN timber.
PLEASE NOTE our bow top panels are not stock items and are made to order. Therefore are treated as bespoke orders. Please refer to the terms and conditions for full details on bespoke orders.
Select options
This product has multiple variants. The options may be chosen on the product page
Round top picket fence panels
Constructed from pressure-treated brown sawn timber. Our traditional round top picket panels are made using planed ex 75mm x 22mm picket boards and ex 50 x 35mm backing rails. These heavy duty picket panels are made to last and compliment front or back garden spaces. They can fit into slotted concrete posts or be screwed into timber posts. Upon order if you would prefer half pail ends these can be screwed into timber posts.
4ft high panels come with an extra backing rail for added strength. 3 rails as opposed to the standard 2.
Our panels are available either 6ft or 7ft in width. Height sizes 2ft, 2ft6", 3ft and 4ft are available. Customer sizes are available upon request and can be made using 3x2 backing rails if required. Please contact the office for more details.
Select options
This product has multiple variants. The options may be chosen on the product page
Bow Top Square Hole Trellis Fence Panel
Can be used as stand alone panels or on top of traditional panels. Made with heavy duty battens in a square hole design these trellis fence panels compliment any garden. Made with approx 4inch x 4inch or 100mm x 100mm sized holes and finished with a Bow Top for decorative finish
Constructed from pressure-treated brown sawn timber. All panels are 6ft in width. Odd sizes available upon request, please contact the office for more details.
Please note in order to get the toprail to bend we use thinner capping than on our standard square top trellis/panels.
Select options
This product has multiple variants. The options may be chosen on the product page
Concrete Security Fence Posts
Concrete Security Fence Posts
Your fence relies upon the strength of your posts. Therefore it is crucial that your posts are durable and strong. Our concrete posts are wet caste giving them a smooth finish on their face sides.
Unlike our standard concrete posts there is no lug for the concrete gravel board to sit on. This is due to a variety of uses where the post may be inserted further into the ground and/or to accommodate non standard fence heights.
The intermediate posts measure 125mm in thickness and 100mm wide and the three way / corner posts are 125mm thick and 125mm wide. These concrete posts are bigger than the standard posts which makes them ideal for fencing that is retaining soil or taller fences with more wind exposure.
Designed to withstand the elements with steel reinforcement rods. Unlike timber posts they are maintenance free and will last for years giving you peace of mind.
Smaller sizes available with our standard concrete posts sold separately
Select options
This product has multiple variants. The options may be chosen on the product page
Pressure Treated Trellis Batten 40mm x 18mm Brown
Our Brown UC3 pressure treated battens are available in both 2.4m and 1.82 (6ft) lengths. Ideal for various applications including trellis, fencing and general outdoor joinery.
These battens can be used to create popular slatted panels designs. They can be used in conjunction with pre-made trellis (Sold separately) or as a stand alone project. The battens can also be used for doorstops on gates for example or to make panels wider. They have a variety of applications made easier with alternative sizes available.
With treatment pumped into the timber these are ideal for external applications. The brown colour compliments all our other timber options including various trellis designs and close board panels to blend in effortlessly.
Measuring 40mm x 18mm these battens are durable enough to offer long lasting solutions but also manageable for DIY applications.
Select options
This product has multiple variants. The options may be chosen on the product page
Prima Composite Gravel boards for DuraPost
DuraPost PRIMA composite gravel boards part of the DuraPost fencing system
The dimensions of these boards 50mm thick x 150mm high x 6ft Wide
These gravel boards can be fitted individually under standard fence panels. Or they can be stacked on top of each other to create a wall of composite gravel board. They can fit into our standard concrete posts or Classic Durapost. The advantages of PRIMA composite gravel boards is that they require no maintenance and they are recyclable.
These are much lighter than their concrete equivalent. 6ft composite gravel board weighs approximately 3Kg compared to 30kg for the concrete equivalent.
We have two colours available Black or Anthracite Grey
When retaining soil we would recommend the use of the steel reinforcement rods in each gravel board to prevent movement.
51mm Panel Clip
Our galvanised fence panel clips with pre-drilled holes can be used to easily fix panels or even gravel boards onto timber posts. Measuring 51mm these clips are wide enough to accommodate concrete gravel boards and heavy duty close board panels.
Our brackets are supplied with pre-drilled fixing holes, allowing you to align your bracket before fixing into place. It's made from galvanised steel, which is very strong and has good resistance to corrosion, so ideal for external applications. These can be fixed into place using nails or screws (available separately).
Easy to install and robust in construction these clips eliminate the need to hammer or screw the panels themselves to posts. This reduces the risk of any accidental damage to fence panels.
75mm x 75mm Timber Arris Rails
Pressure treated arris rails for fencing applications
UC3 treated arris rails are ideally used for feather edge / close board pieces to be nailed into situ. This rails are thicker than standard fence backing rails.
A vital component of the traditional arris rail / feather edge fencing. Fences upto 1.2m high usually only require 2 horizontal arris rails. Over 1.2m to 1.8m would require 3 arris rails.
Arris rails can fit into mortice type posts or be mounted to square timber post using brackets. (sold separately)
Available in 3m lengths that can be cut to size allowing you to cover greater areas without posts. Please note the more posts you have the stronger the fence will be.
DuraPost Corner or Gate Post
Durapost steel system
In addition to the Classic 55 x 54mm sold separately we also offer the DuraPost Corner or Gate Post. Allowing you to use the Durapost system to incorporate multiple fence lines and gate systems where required.
Please note post caps, U-channels (to make slots for panel sections) and 4x2 timbers (to hang timber gate) are sold separately on this website. You will also require self tapping screws to fix together.
Available in Anthracite Grey and Black finish
Made in the UK from sustainable materials (made from 50% recycled steel and 100% recyclable at end of life), DuraPost® steel fence posts not only enhance your environment, but are kinder to the environment as well.
Select options
This product has multiple variants. The options may be chosen on the product page
DuraPost U Channel (Wall or End Post)
DuraPost® steel system
In addition to the Classic 55 x 54mm sold separately we also offer the DuraPost U-channel here
Available in Anthracite Grey and Black finish
These posts can be fixed used to fix to corner or gate posts (sold separately) and for end posts by fixing to walls.
Made in the UK from sustainable materials (made from 50% recycled steel and 100% recyclable at end of life), DuraPost® steel fence posts not only enhance your environment, but are kinder to the environment as well.
Select options
This product has multiple variants. The options may be chosen on the product page
Prepared Premium Redwood Screening Battens 19mm x 50mm
Our Planed Square Edge (PSE) premium redwood exterior screening battens 19mm x 50mm (finished 14mm x 44mm) are available in various sizes. 4.2m lengths ideal for covering large areas in this contemporary design. Or available in 1.828 / 6ft lengths for making up panels (also available separately)
Pressure-treated to UC3 standards, these battens are designed for external use, above-ground and offers rot protection.
Please note: Prices are for individual battens and images are for illustration purposes only. Timber is a natural product that can be prone to warping or twisting especially in extreme temperatures.
Select options
This product has multiple variants. The options may be chosen on the product page
Prepared Premium Redwood Slatted Panels (One Sided)
Premium Redwood Contemporary Slatted Panels (Single Sided) made with prepared finish battens. Treated for external use. Venetian horizontal design, which has become increasingly popular. Can be used as trellis, fence panels or screening
Designed to allow light pass through these 19mm x 50mm battens are nailed onto 38mm x 50mm prepared backing rails. Framework on the back of the panel is visible and holds the battens in place. The overall depth of these panels is 48mm, designed to fit within slotted concrete posts. However they can also be screwed into timber posts. Finished off with a capping on the top of the panel.
Custom sizes available upon request. Panels can be made to specific sizes to fit existing posts or piers.
PLEASE NOTE these panels are not kept in stock and made to order. Lead times are approximately 1-2 weeks. Please refer to the terms and conditions for full details on bespoke orders.
Select options
This product has multiple variants. The options may be chosen on the product page
Shiplap Premium Redwood Cladding 125mm x 19mm
Shiplap Redwood Premium Cladding (finished 14.5mm x 119mm) available in either 2.35m or 4.8m lengths
Tanalised treatment to UC3 standards, these boards are designed for external use, above-ground and offers rot protection.
Ideal for cladding gates, panels, sheds or buildings. Designed for easy installation and long lasting, it's the ideal choice for either professional builders and DIY enthusiasts alike. We use this timber for our own sheds/gates that we fabricate.
Please note: Prices are for individual boards and images are for illustration purposes only. Timber is a natural product that can be prone to warping or twisting especially in extreme temperatures.
Select options
This product has multiple variants. The options may be chosen on the product page
